Welcome to Lat 26°®

Lat 26 Nano Ceramic MSDS

LAT-NC4; LAT-NC32

Date Prepared:

09/01/2018

Safety Data Sheet
 
Section 1.  Identification
Manufacturer:
Lat 26˚
205 SW 30th Street
Fort Lauderdale, FL 33315
1-754-206-2356
For Hazardous Materials [or Dangerous Goods] Incident
Spill, Leak, Fire, Exposure, or Accident
Call CHEMTREC Day or Night
1.800.424.9300 / 703.527.3887 (CCN815696)
Product Identification:   LAT26 Nano-Ceramic
Suggested Use: Gelcoat Protection
 
Section 2. Hazard(s) Identification

Hazard Class & Category Codes

Hazard Statement Codes

Pictograms

Signal Word

Skin

H316: Causes mild skin irritation

Warning

Eye

H320: Causes eye irritation

Body

H372: Causes damage to organs through prolong

Or repeated exposure (e.g. lung, respiratory system)

                       

Precautionary Statements Codes

Precautionary Statements

P102

Keep out of reach of children

P261

Avoid breathing dust/fumes/gas/mist/vapors/spray

P264

Wash hands thoroughly after use

P271

Use in well-ventilated area

P280

Wear protective gloves/ protective clothing/ eye protection/ face protection.

P303 + P353 + P361

IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower

P313 + P332

If skin irritation occurs: Get medical advice/attention

P304 + P312 + P340

IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. Call a POISON CENTER or doctor/physician if you feel unwell

P305 + P338 + P351

IF IN EYES: Remove contact lenses if present and easy to do, continue rinsing

P313 + P337

If eye irritation persists: Get medical advice/attention

P309 + P311

If exposed or you feel unwell: Call a CHEMTREC/POISON CENTER or Doctor

P501

Dispose of contents/container to approved waste facility

 
Section 3. Composition/Information on Ingredients

Component Name

CAS Number

Percentage by weight

Solvent

64742-47-8

< 50%

Commercially conserved formula

Trade Secret

< 50%

 
Section 4. First Aid Measures
Eyes:  Immediately raise eyelids and flush with plenty of water for at least 15 minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If irritation persists, seek medical care
Skin:  Immediately water contaminated area with plenty of water and soap. If irritation persists, get medical attention
Inhalation:  Remove victim to fresh air and keep at rest in a position comfortable for breathing. IF exposed or you feel unwell: Immediately call CHEMTREC, POISON CENTER or Doctor/Physician
Ingestion: Rinse mouth. DO NOT induce vomiting without professional instruction. Get medical attention immediately
Acute Effects: It causes irritation to eyes. In case of ingestion, it causes irritation to intestines and stomach
Delayed Effects: It causes damage to organs through prolonged or repeated exposure (e.g. lung, respiratory system)
Personal Protection Equipment: Recommend wearing protection gloves and uniforms. Wear respirators and safety goggles when exposure limits are exceeded or liquid may splash
 
Section 5. Fire Fighting Measures
Flash Point:  161.6°F
Autoignition Temperature:  Not determined
Flammability Limits in Air:  Not determined
Extinguishing Media: Water Spray, Dry Powder, Foam, Carbon Dioxide
Fire Fighting Procedure:  Firefighters should wear self-contained breathing apparatus and full protective equipment
Hazardous Decomposition Products:  Carbon oxides, nitrogen oxides and fumes may be released from heating or fire which is irritating to respiratory system
 
Section 6.  Accidental Release Measures
Containment/Clean up: 
  • For small spills: Mop up or absorb with an inert dry material (e.g. sand, dry limes) and place in an appropriate labeled waste disposal container
  • For large spills: Isolate contaminated area and set up a warning board. The persons handling the spill are recommended to wear protective clothing. Build up dike or dig pit for collection. Dilute the spilled liquid till it is not combustible. Protect the working staff. Collect the spilled material with pump into an appropriate container and transport the waste to the disposal place.
Environmental Precautions: Keep cleaning run-offs out of municipal sewers and open bodies of water. Comply with local and national laws and regulations.
 
Section 7: Handling and Storage
Handling:  Ensure adequate ventilation. Workers must wear proper protective equipment and must operate strictly according to relative rules. Stay away from oxidants and combustible materials. Avoid damage of packaging or containers during handling
Storage: Requirements to be met by storeroom: Store in a well-ventilated, cool and dry store room. Store room should be equipped with proper facilities for accidental leakage.
 
Section 8: Exposure Controls and Personal Protection
Engineering Controls:
            Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at the end of workday.
Personal Protective Equipment for Routine Handling:
Eyes:  Face shield and safety glasses should be worn. Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166 (EU)
Skin:  Handle with gloves. Gloves must be inspected prior to use. Use proper gloves removal technique (without touching glove’s outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands. Selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the standard EN 374 derived from it
Suitable Gloves:  Nitrile rubber protection gloves
Body Protection: Complete suit protecting against chemicals, the type of protective equipment must be selected according to the concentration and amount of dangerous substance at the specific workplace
Respirator Protection: Where risk assessment shows air-purifying respirators are appropriate, use a full-face respirator with multi-purpose combination (US) or type ABEK (EN14387) respirator cartridges as a backup to engineering controls. If the respirator is the sole means of protection, use a full-face supplied air respirator. Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU)
Control of Environmental Exposure: Prevent further leakage or spillage if safe to do so. Do not let products enter drains
Precautionary Measures:  Avoid eye contact.
 
Section 9: Physical and Chemical Properties:

Physical Form:

Liquid

Viscosity:

Not determined

Color:

Transparent

Melting Point:

Not determined

Odor:

Paraffin Oil like

Boiling Point:

Not determined

Specific Gravity @ 25C:

0.90 gr/ml

Flash Point:

161.6° F

Solubility in Water:

Hardly Soluble

Vapor Pressure @ 25° C

Not determined

VOC content (% by weight)

Not determined

pH:

Not determined

 

Section 10: Stability and Reactivity
Chemical Stability:  Stable under normal temperatures and pressure
Hazardous Decomposition Products: Carbon Oxides, Nitrogen Oxides and fumes may be released from heating or fire which is irritating to respiratory systems
Hazardous Polymerization:  Will not polymerize
Conditions to Avoid:  High temperatures and flames
Materials to Avoid:  Oxidizing agents. 
 
Section 11: Toxicological Information
Product Toxicity Data: The toxicity data of this product has not been determined by testing or research, but to relevant literature and classification standard in Annex 2 of GHS, the toxicity of this product is classified as category 5. The toxicity data shown below is for reference only
Acute Toxicity:            
LD50 Oral – Rat à 5.000 mg/kg
LC50 Inhalation – Rat – male and female – 4 h à 7.630 mg/m3
(OECD Test Guideline 403)
LD50 Dermal – Rabbit – male and female à 2.000 mg/kg
(OECD Test Guideline 402)
  • Contact with Eyes: It causes eye irritation and symptoms may include redness, tear and ache
  • Contact with Skin: It causes mild irritation to skin
  • Inhalation: It may cause irritation to nose, throat and respiratory system if inhaling concentrated vapors of this liquid. Symptoms may include dizziness, headache, nausea and tightness in chest
  • Ingestion: It can cause irritation to intestinal tract. Symptoms may include nausea, vomiting and bellyache
  • Effects of Overexposure – Chronic: Causes damage to organs through prolonged or repeated exposure (e.g. lung, respiratory system)
  • Carcinogenicity: Not listed by IARC, NTP, ACGIH & EPA
  • Sensitivity: Not found
  • Teratogenicity: Not found
  • Mutagenicity: Not found
  • Irritation Data: Causes eye and skin irritation
 
Section 12: Ecological Information
Eco-toxicity: Toxicity to fish LC50 – other fish - < 100mg/l – 96 h
Persistence and Degradability: No relevant data for finished product
Bio-accumulative Potential: Not Found
Mobility in Soil: No relevant data for finished product
Notes: Do not allow product to reach ground water, water course or sewage system
 
Section 13: Disposal Considerations
Do not allow product to reach sewage system. Do not throw it into any open bodies of water. Waste recycling must be operated strictly according to relevant regulations.
 
Section 14: Transportation Information
14.1 UN Number:
- ADR/RID: - IMDG: - IATA: -
14.2 UN Proper Shipping Name:
- ADR/RID: Not dangerous goods
- IMDG: Not dangerous goods
- IATA: Not dangerous goods
14.3 Transport Hazard Class(es):
- ADR/RID: - IMDG: - IATA: -
14.4 Packaging Group:
- ADR/RID: - IMDG: - IATA: -
14.5 Environmental Hazards:
- ADR/RID: no IMDG
- Marine Pollutant: no
- IATA: no
14.6 Special Precautions for Users:
- No data available
 
Section 15: Regulatory Information
This safety datasheet complies with the requirements of Regulation (EC) No. 453/2010
 15.1 Safety, Health and Environmental Regulations/Legislation specific for the substance or mixture
- CAS-No: 64742-82-1
- Reach: Restrictions on the manufacture, placing on the market and use of certain dangerous substances, preparations and articles (Annex XVII)
- Carcinogens: Category 1B
- Restricted to Professional Use
- See Annex XVII to Regulation (EC) no. 1907/2006 for conditions of restriction
15.2 Chemical Safety Assessment
For this product a chemical safety assessment was not carried out
 
Section 16: Other Information
The information accumulated herein is believed to be accurate but is not warranted to be whether originating with the company or not. Recipients are advised to confirm in advance of need that the information is current, applicable, and suitable to their circumstances. Any material supplied is the sole responsibility of the user. All materials may present unknown health hazards and we cannot guarantee that the hazards listed herein are the only hazards that exist.