Welcome to Lat 26°®

Lat 26 Metal Polish MSDS

Material Safety Data Sheet

COMPANY INFORMATION AND PRODUCT DESCRIPTION

Lat 26°

205 SW 30th ST

Fort Lauderdale, FL 33315 P: 754 206 2356

F: 954 337 0954

Product Name:

Lat 26° Metal Polish

Part Number

LAT-MP16

LAT-MP1

Revised Date:

03-2018

INGREDIENTS INFORMATION/COMPOSITION

Chemical Name

CAS Number

Percent

Water

CAS# 7732-18-5

Balance

Synthetic Isoparaffinic Hydrocarbon

CAS# 64742-47-8

5-7%

Petroleum hydrocarbon

CAS# 8052-41-3

3-5%

Aluminum Oxide

CAS# 1344-28-1

10-15%

Acrylic Polymer

CAS# 0009003-01-4

<1%

Light Mineral Oil

CAS# 8042-47-5

5-8%

PHYSICAL AND CHEMICAL PROPERTIES

Specific Physical Form:

Cream Liquid

Specific Gravity

1.2

Odor, Color, Grade

Light Blue, Slight Odor

Solubility in Water

Yes

Boiling Point

Approximately 212F

pH

7-8

Physical Appearance

Light Blue Cream Liquid

Flash Point

235F

Percent Volatiles

5-7%

Viscosity

<100

Evaporation rate

N/A

Flammability

Non-flammable

Explosive Properties

None

Oxidation Properties

None

HAZARDS AND FIRST AID MEASURES

Skin:

Flush exposed area with water. Remove all contaminated clothing. Prolonged or repeated contact can cause moderate irritation.

Breathing:

Excessive inhalation can cause nasal and respiratory irritation or damage, dizziness, nausea, headache, and possible unconsciousness.

Eyes:

Flood with large amounts of water at least 20 minutes; get immediate medical attention if irritation persists. Can cause irritation, redness, tearing, and blurred vision.

Inhalation:

If affected, remove individual to fresh air. If breathing is difficult administer oxygen. If breathing has stopped, give artificial respiration. Keep person warm, calm, and get medical attention.

Swallowing:

Can cause nausea, vomiting, and diarrhea. Can be fatal. Do not induce vomiting. Seek medical attention immediately.

FIRE FIGHTING MEASURES

Self-contained breathing apparatus and protective clothing should be worn in fighting large fires involving chemicals. Evacuate

area in case of overheating or fire. Vapors are heavier than air and may travel to a source of ignition and flash back. Static electricity will accumulate and may ignite vapors.

PERSONAL PROTECTION

Health

1

Flammability

0

Reactivity

0

An emergency eye wash should be considered accessible to the work area.

STABILITY AND REACTIVITY

Stability

Stable

Materials and conditions to Avoid

None known

Hazardous Polymerization:

Will not occur

Hazardous Decomposition:

Under recommended usage conditions, hazardous decomposition products are not expected.

Hazardous decomposition products may occur as a result of oxidation, heating, or reacting with another material.

TRANSPORTAION INFORMATION

Non-Regulated. Keep away from food stuffs

DISPOSAL CONSIDERATIONS

Discharge spent solutions and small quantities (less than 5 gallon (19 L) to a wastewater treatment system. Reduce discharge rate

if foaming occurs. As a disposal alternative, dispose of waste product in a facility permitted to accept chemical waste.


SPILL OR LEAK PRECEDURES

Shut off ignitions sources. Stop spill at source, contain spill and keep from entering waterways or sewers. Small quantities may

be soaked up on inert absorbents.

SPECIAL PRECAUTIONS AND OTHER COMMENTS

The compounds in this product biodegrade in the environment. Containers of this material may be hazardous when emptied.

Since emptied containers retain product residues. (Vapors, liquid, and/or solid) All hazard precautions given in this datasheet must be observed.

The information accumulated herein is believed to be accurate but is not warranted to be whether originating with the company or not. Recipients are advised to confirm in advance of need that the information is current, applicable, and suitable to their circumstances. Any material supplied is the sole responsibility of the user. All materials may present unknown health hazards and we cannot guarantee that the hazards listed herein are the only hazards that exist.