Lat 26˚ UV Protect is the longest lasting protection you can apply to your yacht or boat on a variety of surfaces including but not limited to paint, gel coat, stainless steel, vinyl, leather, rubber, hypalon, Isinglass, and acrylic surfaces. This product takes minutes to apply to a clean and dry surface. Simply wipe on and wipe off.
UV Protect is recommended for Color Paints & Gelcoat Surfaces
Apply to a clean dry surface only. For best results apply to a properly prepared surface. Apply with a Lat 26˚ Sealing Pad. Spay the applicator (not the surface) with Lat 26˚ UV Protect. Apply a very thin coat to the entire surface. Wipe on thoroughly until only a light film remains then wipe off all excess. Allow 12 to 24 hours before getting wet and for full cure of product. For protection against soot and black streaks apply Lat 26˚ Carbon Guard.
Synthetic Isoparaffinic Hydrocarbon (64742-48-9); Amino-Alkoxy polydimethylsiloxane (71750-80-6); Petroleum Hydrocarbon (64742-89-8); Petroleum distillate (64742-82-1)
Keep this product and all chemicals away from skin and eye contact. KEEP AWAY FROM REACH OF CHILDREN.
Skin: Flush exposed area with water. Remove all contaminated clothing. Prolonged or repeated contact can cause moderate irritation. Eyes: Flood with large amounts water at least 20 min.; get immediate medical attention if irritation persists. Can cause severe irritation, redness, tearing, and blurred vision. Swallowing: Can Cause, nausea, vomiting, and diarrhea. Do not induce vomiting. Aspiration of liquid while vomiting may injure lungs seriously. Overexposure by ingestion may cause drowsiness, dizziness or confusion. Seek Medical Attention immediately.
Read and follow directions carefully. More detailed information on this product can be found at www.lat26degrees.com. Lat 26˚ is not responsible for inappropriate use of this product. It is unlawful to use this product in a manner inconsistent with the instructions given on the label.